Carboxylic acids derived from triacylglycerols that contribute to the increase in acid value during the thermal oxidation of oils
HomeHome > Blog > Carboxylic acids derived from triacylglycerols that contribute to the increase in acid value during the thermal oxidation of oils

Carboxylic acids derived from triacylglycerols that contribute to the increase in acid value during the thermal oxidation of oils

Jun 18, 2023

Scientific Reports volume 12, Article number: 12460 (2022) Cite this article

1969 Accesses

1 Citations

20 Altmetric

Metrics details

Acid value (AV), is a widely used indicator of oil degradation that, by definition, measures the free fatty acids formed via the hydrolysis of triacyclglycerols. However, based on observations made in previous studies, we hypothesized that the oxidation of triacylglycerols leads to the formation of carboxylic acids with a glycerol backbone which are also calculated as AV. In this study, we aimed to identify such carboxylic acids and prove the above hypothesis. Heating a canola oil at 180 °C for 6 h without the addition of water resulted in an increase in AV from 0.054 to 0.241. However, the contribution of free fatty acids to this increase in AV was minimal; free fatty acid-derived AV before and after heating was 0.020 and 0.023, respectively. Then, via mass spectrometric analyses, we identified two 8-carboxy-octanoyl (azelaoyl) -triacylglycerols (i.e., dioleoyl-azelaoyl-glycerol and oleoyl-linoleoyl-azelaoyl-glycerol) in the heated oil. Azelaoyl-triacylglycerols-derived AV before and after heating the oil was 0.008 and 0.109, respectively, demonstrating that azelaoyl-triacylglycerols contribute to AV. Such an increase in AV by azelaoyl-triacylglycerols was also observed in an oil used to deep-fry potatoes (i.e., an oil with a relatively high water content). These results suggest that AV is also an indicator of the thermal oxidation of triacylglycerols.

Vegetable oils (e.g., canola, soybean, palm, and olive oil) are widely used in food applications. However, oil deterioration during food manufacturing, cooking, and storage can lead to undesirable flavor and taste of foods1,2,3. Thus, the assessment of oil deterioration is highly important to ensure the quality of food products4.

Under extensive food processing (e.g., deep-fry) and inadequate storage conditions (e.g., high temperature and humidity), triacylglycerols, the main constituent of oils, gradually hydrolyze into glycerol and free fatty acids5. Therefore, acid value (AV), which measures the free fatty acid content of oils, has been widely and frequently used as an indicator of oil deterioration. AV of an oil is determined by titration of carboxylic acids (RCOOH) with potassium hydroxide (KOH) as shown in the reaction below.

In ISO 660, AV is defined as the amount of potassium hydroxide (in milligrams) necessary to neutralize the free fatty acids contained in 1 g of sample6. Some countries such as Japan and Austria specify that frying oils with an AV above 2.5 should be discarded7.

Based on the principle above, an increase in AV can be rephrased as the “progress of triacylglycerol hydrolysis” in an oil (Fig. 1). Thus, by definition, water is required to increase the AV of an oil. Several studies, however, have observed an increase in AV by heating oils under conditions without the addition of water8,9,10,11,12,13. For example, Ogata et al. observed an increase in the AV of soybean oil by simply heating the oil at 180 °C8. However, the compounds that caused this increase in AV were not mentioned in the study. Meanwhile, Fujisaki et al. observed an increase in the AV of high-oleic safflower oil by heating the oil at 180 °C and argued that this was due to the formation of free fatty acids9. However, as we discuss in later sections, simply heating an oil without the addition of water presumably does not provide enough water to significantly hydrolyze triacylglycerols. Furthermore, in the same study, the increase in AV caused by heating was suppressed by lowering atmospheric oxygen concentrations. Hence, another possible explanation for the increase in AV is that the triacylglycerols in the oil were oxidized, leading to the formation of carboxylic acids which were calculated as AV. However, to the best of our knowledge, no study has verified that the oxidation of triacylglycerols induces an increase in AV. Moreover, compounds other than free fatty acids that contribute to AV have not been identified.

Hypothesis regarding the formation of carboxylic acids by the heating of canola oil.

Based on the above background, we hypothesized that the oxidation of triacylglycerols leads to the formation of carboxylic acids with a glycerol backbone (Fig. 1), and these carboxylic acids can be calculated as AV. Hence, the aim of this study was to prove this hypothesis and to identify and quantitate the carboxylic acids that contribute to the heating-induced increase in AV. Consequently, we first confirmed that heating a vegetable oil (i.e., canola oil) without the addition of water results in a significant increase in AV. Then, carboxylic acids with a glycerol backbone that contributed to this increase in AV were identified by ultra-high performance liquid chromatography time-of-flight mass spectrometry (UPLC-Tof/MS). Quantification of the carboxylic acids was performed by gas chromatography-mass spectrometry (GC-MS). The identified carboxylic acids were also found in an oil used to deep-fry potatoes (i.e., an oil with a relatively high water content), suggesting their further contribution to AV. These results suggested that AV is not only an indicator of triacylglycerol hydrolysis but also an indicator of triacylglycerol oxidation. These findings should contribute to improving the quality of various oils and foods.

As described in the introduction, AV is an important indicator to evaluate the quality of vegetable oils. AV, by definition, measures the amount of free fatty acids formed by the hydrolysis of triacylglycerols. Nevertheless, several studies have observed an increase in AV by simply heating vegetable oils without the addition of water8,9,10,11,12,13. The reasons underlying this phenomenon have not been evaluated in previous studies. In this study, we hypothesized that the oxidation of triacylglycerols leads to the formation of carboxyl acids that possess a glycerol backbone (Fig. 1), and these carboxylic acids are calculated as AV.

Firstly, we aimed to confirm that the heating of a vegetable oil induces an increase in AV even when no water is added to the oil. Fresh canola oil (10 g) was heated in a 51 mm stainless steel dish at 180 °C for 6 h. Heating the oil caused a significant increase in AV from 0.054 to 0.241. Other parameters (color and viscosity) were also increased (Table 1). These findings were in good agreement with the results of previous studies8,9,10,11,12,13.

As it was confirmed that heating an oil without the addition of water induces an increase in AV, we then evaluated the contribution of free fatty acids to this increase in AV. Free fatty acids contained in the heated oil were fluorescently labeled with the 9-anthryldiazomethane (ADAM) reagent and quantified by high-performance liquid chromatography fluorescence detection (HPLC-FLD). As a result, heating the oil for 6 h at 180 °C induced only a slight increase in the amount of free fatty acids (palmitic acid, stearic acid, oleic acid, linoleic acid, and linolenic acid) contained in the oil. This slight increase in free fatty acids may be due to the hydrolysis of triacylglycerols by water that remains slightly in the oil even after heating (80–300 ppm; data not shown).

We then calculated how this slight increase in free fatty acids affected AV. As such, “free fatty acid-derived AV” was calculated based on the above quantification of free fatty acids. The following formula was used (where 56.11 corresponds to the molecular weight of KOH (g/mol)):

Free fatty acid-derived AV before and after heating the canola oil was 0.020 and 0.023, respectively, demonstrating an increase of only 0.003. Meanwhile, as mentioned above, the actual AV (determined by titration) increased from 0.054 to 0.241, demonstrating an increase of 0.187. Hence, these results strongly suggest that carboxylic acids other than free fatty acids were formed during the heating of the oil, and these carboxylic acids were measured as AV.

The above results suggested that carboxylic acids other than free fatty acids were formed during the heating of oils. We anticipated that these carboxylic acids would also react with the ADAM reagent, and their structures could be identified by analyzing the resultant ADAM derivatives. Hence, the above oil, heated for 6 h without addition of water, was derivatized with the ADAM reagent and analyzed with mass spectrometry. Collision induced dissociation of ADAM derivatives is known to yield a characteristic product ion of m/z 191, corresponding to an anthryl group14,15,16. Thus, we attempted to identify carboxylic acids in the ADAM-derivatized oil by searching for the precursor ions that afforded the fragment ion of m/z 191. This search was conducted using the UPLC-Tof/MSE mode which simultaneously obtains the MS spectrum and product ion spectrum without selection of the precursor ion (i.e., data-independent MS/MS analysis; Fig. 2)17,18,19.

Typical chromatograms obtained during the UPLC-Tof/MSE analysis of ADAM-derivatized heated canola oil. The heating of canola oil was performed at 180 °C for 6 h. MS chromatogram (a). Product ion chromatogram without selection of the precursor ion (b). Extracted ion chromatogram of the product ion chromatogram without selection of the precursor ion (c, at m/z 191.0861). Extracted ion chromatogram of the MS chromatogram (d, at m/z 1001.6832 [M + Na]+; and e, at m/z 1003.6985 [M + Na]+). Each peak is annotated with the retention time.

The extracted ion chromatogram of m/z 191.0861 (calcd. for C15H11, 191.0861; anthryl group) in the product ion chromatogram demonstrated two major peaks at the retention times of 12.56 min and 13.22 min (peak I and peak II; Fig. 2c). A comparison of these peaks with the MS chromatogram suggested that the precursor ion of each peak was m/z 1001.6832 ([M + Na]+ of peak I; calcd. for C63H94O8Na, 1001.6846; Fig. 2d) and m/z 1003.6985 ([M + Na]+ of peak II; calcd. for C63H96O8Na, 1003.7003; Fig. 2e), respectively. These peaks were hardly detected before heating (data not shown), suggesting that these ions were the ADAM derivatives of carboxylic acids formed during the heating of the oil. In addition to the above data-independent MS/MS analysis, product ion scan with the selection of precursor ions (m/z 1001.6832 and m/z 1003.6985) was conducted (Supplementary Fig. S1 online). The anthryl group-characteristic fragment ion (m/z 191) was observed in this product ion spectrum, confirming that m/z 1001.6832 and m/z 1003.6985 were ADAM derivatives.

Under the assumption that m/z 1001.6832 and m/z 1003.6985 each possess only one anthryl group (C15H11) in their structures, we considered that the molecular formula of each ion before ADAM derivatization was C48H84O8 (calcd. mass 788.6166 Da) and C48H86O8 (calcd. mass 790.6323 Da), respectively. Hence, to confirm that these carboxylic acids were indeed contained in the heated oil, oils that were not derivatized with the ADAM reagent were analyzed by UPLC-Tof/MS. As expected, the ions corresponding to these carboxylic acids, m/z 787.6088 ([M−H]−, calcd. for C48H83O8, 787.6088; Fig. 3a,b) and m/z 789.6248 ([M−H]−, calcd. for C48H85O8, 789.6244; Fig. 3a,c) were observed in the total and extracted ion MS chromatograms.

Typical chromatograms obtained during the UPLC-Tof/MS analysis of heated canola oil (underivatized with ADAM). The heating of canola oil was performed at 180 °C for 6 h. Base peak ion chromatogram (a). Extracted ion chromatogram (b, at m/z 787.6088; c, at m/z 789.6248). Each peak is annotated with the retention time.

To further analyze the structure of m/z 787.6088 and m/z 789.6248, we selected these ions as precursor ions and conducted a product ion scan. Product ion scan of m/z 789.6248 afforded m/z 281.2481 (calcd. for C18H33O2, 281.2481) corresponding to oleic acid (Fig. 4a). Additionally, m/z 525.3796 (calcd. for C30H53O7, 525.3791) corresponding to the loss of one oleic acid, and m/z 261.1340 (calcd. for C12H21O6, 261.1338) corresponding to the loss of two oleic acids were detected. Hence, m/z 789.6248 was suggested to consist of two oleic acids. Furthermore, based on the characteristic ion of m/z 187.0974 (calcd. for C9H15O4, 187.0970) and the structures of m/z 525.3796 and m/z 261.1340, m/z 789.6248 was suggested to be a glycerol ester of two oleic acids and one C9H16O4. Since C9H16O4 must possess a free carboxyl group that can react with the ADAM reagent, we assumed that it was nonanedioic (azelaic) acid, a saturated 9-carbon dicarboxylic acid. Similarly, the product ion scan of m/z 787.6088 afforded product ions corresponding to oleic acid, linoleic acid, and nonanedioic acid (Fig. 4b). From these results, we identified 8-carboxy-octanoyl (azelaoyl)-triacylglycerols, namely, dioleoyl-azelaoyl-glycerol (C48H86O8) and oleoyl-linoleoyl-azelaoyl-glycerol (C48H84O8), as the main carboxylic acids contained in the heated canola oil that were not free fatty acids.

Product ion mass spectra of the target carboxylic acids. Heated canola oil (without ADAM derivatization) was analyzed by UPLC-Tof/MS. m/z 789.6 was selected as a precursor ion for (a) and m/z 787.6 was selected as a precursor ion for (b). The structures illustrated in this figure are the triacylglycerols bearing nonanedioic (azelaic) acid at the α position.

The fatty acid composition of the canola oil used in this study was 66.1% oleic acid and 19.1% linoleic acid (Supplementary Table S1 online). Hence, we assumed that triacylglycerols containing oleic or linoleic acid were thermally decomposed to afford azelaic acid. Based on the results of previous studies20,21,22,23,24,25 and this study, we propose the pathway described in Fig. 5. In the case of dioleoyl-linoleoyl-glycerol (I), its thermal oxidation affords dioleoyl-(9-hydroperoxyl-octadecadienoyl)-glycerol (II) or dioleoyl-(13-hydroperoxyl-octadecadienoyl)-glycerol (VI)20,21,22. After the formation of alkoxy radical III, a β-scission reaction between C9 and C10 of III yields dioleoyl-(9-oxo-nonanoyl)-glycerol (IV)21, 23, 24. Further oxidation of IV yields a C9 dicarboxylic compound (V)25. Similarly, after the formation of alkoxy radical VII, a β-scission reaction between C13 and C14 of VII yields dioleoyl-(13-oxo-tridecadienoyl)-glycerol (VIII). VIII may also be converted to IV23. Although C8 and C12 dicarboxylic acids can theoretically be formed through the β-scission of III and VII, the C9 dicarboxylic acid was mainly detected in this study, thus, other pathways may also be relevant.

Proposed scheme of the formation of dioleoyl-azelaoyl-glycerol (V).

We confirmed above that the heated canola oil contained dioleoyl-azelaoyl-glycerol and oleoyl-linoleoyl-azelaoyl-glycerol. To quantify these azelaoyl-triacylglycerols, the heated oil was subjected to methyl esterification, and dimethyl nonanedioate (azelate), the expected product, was analyzed by GC-MS. As a result, dimethyl azelate was clearly detected from the heated oil (Supplementary Fig. S2 online). Other dimethyl dicarboxylates were either detected only in trace amounts or were not detected. The concentration of dimethyl azelate increased significantly from 1.4×102 to 1.9×103 nmol/g by heating the oil for 6 h.

We then calculated how this significant increase in azelaoyl-triacylglycerols affected AV. Hence, “azelaoyl-triacylglycerols-derived AV” was calculated based on the above quantification of dimethyl azelate. Azelaoyl-triacylglycerols-derived AV was calculated using the following formula:

Azelaoyl-triacylglycerols-derived AV before and after heating the oil for 6 h was 0.008 and 0.109, respectively, demonstrating an increase of 0.101. Considering that the actual AV increased from 0.054 to 0.241 (an increase of 0.187), the increase in azelaoyl-triacylglycerols-derived AV (0.101) accounted for 54.0% of the increase in the actual AV. Meanwhile, as mentioned above, free fatty acid-derived AV increased by only 0.003 (corresponding to 1.6% of the increase in actual AV). Hence, the contribution of azelaoyl-triacylglycerols was considerably larger than that of free fatty acids. To the best of our knowledge, this is the first study to confirm that a compound other than a free fatty acid contributes to AV.

The water content of oils is known to increase during the cooking of foods (e.g., deep-fry) as the water contained in foods are transferred to the oil26. When an oil is heated in the presence of such water, triacylglycerols hydrolyze into free fatty acids, leading to an increase in AV. Many studies in fact have demonstrated that the AV of oils increase when oils are used to cook food (e.g., deep-fry potatoes)11, 13, 27,28,29,30,31. In addition to such an increase in free fatty acids, the results of the current study suggested that azelaoyl-triacylglycerols may also contribute to AV. Hence, we evaluated the contribution of azelaoyl-triacylglycerols to the AV of an oil used to deep-fry potatoes (i.e., an oil with a relatively high water content).

As such, a deep-frying test using frozen French fries was conducted. The total heating time of the oil was 270 min and the total frying time was 126 min. During frying, the average oil temperature was about 170 °C, and the water content was about 1200–2500 ppm. The AV before and after the test, determined by titration, was 0.054 and 0.284, respectively. This increase was comparable to that observed in previous studies where oils were used to cook foods11, 13, 28,29,30. Based on the quantification of free fatty acids and dimethyl dicarboxylates, free fatty acid-derived AV and azelaoyl-triacylglycerols-derived AV were calculated. As a result of deep-frying French fries, the free fatty acid-derived AV increased from 0.020 to 0.058, demonstrating an increase of 0.038. Meanwhile, azelaoyl-triacylglycerols-derived AV increased from 0.008 to 0.078, demonstrating an increase of 0.070. Considering that the actual AV (determined by titration) increased by 0.230 (from 0.054 to 0.284), free fatty acids and azelaoyl-triacylglycerols accounted for 16.5% and 30.4% of the increase in AV, respectively. These results indicate that the formation of azelaoyl-triacylglycerols can also occur during the cooking of foods (i.e., oils with a relatively high water content), and both free fatty acids and azelaoyl-triacylglycerols contribute to AV. Therefore, AV is not only an indicator of free fatty acids formed by the hydrolysis of triacylglycerols (as defined in ISO 660) but also an indicator of azelaoyl-triacylglycerols formed via the oxidation of triacylglycerols. Moreover, the progress of oil deterioration may be evaluated with higher accuracy by measuring free fatty acids and azelaoyl-triacylglycerols in addition to AV.

This study identified azelaoyl-triacylglycerols as compounds that contribute to AV. Azelaoyl-triacylglycerols were found to contribute to the AV of an oil that was heated without addition of water and an oil that was used to cook French fries. Although AV, by definition, is an indicator of triacylglycerol hydrolysis, the results of the current study suggest that AV is also an indicator of azelaoyl-triacylglycerols formed by the oxidation of triacylglycerols. Further research on AV, based on these perspectives, should lead to a reduction in food loss by extending the life cycle of frying oils.

Canola oil was manufactured by J-OIL MILLS, Inc. (Tokyo, Japan; Supplementary Table S1). Aquamicron AX and Aquamicron CXU were purchased from Mitsubishi Chemical Corporation (Tokyo, Japan). ADAM reagent was obtained from Funakoshi Co., Ltd. (Tokyo, Japan). Oleic acid, dimethyl nonanedioate, and methyl heptadecanoate were purchased from FUJIFILM Wako Pure Chemical Corporation (Osaka, Japan). Undecanoic acid was purchased from Tokyo Chemical Industry Co., Ltd. (Tokyo, Japan). Azelaic acid was obtained from Sigma-Aldrich (St. Louis, U.S.A.). Leucine-enkephalin was obtained from Waters (Milford, MA, U.S.A.). Frozen French fries were purchased from a market in Kanagawa, Japan. Other reagents were of the highest grade available.

Fresh canola oil (10 g) was placed in a 51 mm stainless steel dish and heated on a digital heat block (Dry Thermo Unit DTU-2C, TAITEC, Tokyo, Japan) at 180 °C for 6 h. AV was measured according to the official method of the American Oil Chemists’ Society (AOCS, Cd 3d-63)32. Moisture content in the oil was measured by Karl Fischer titration with Aquamicron reagents using a CA-310 Moisture meter (Mitsubishi Chemical Analytech, Tokyo, Japan). The color of the oil was measured using a Lovibond PFXi-880/L (The Tintometer Limited, Amesbury, England) according to the official method of the AOCS (Cc 13e-92)33. Viscosity was measured by placing an oil sample (1.2 mL) between the cone and plate of a VISCOMETER TV-25 (Toki Sangyo, Tokyo, Japan). The measurement was started at 30 °C, and data was recorded every 30 seconds until 2 min. The average data was used as the viscosity.

Free fatty acids were analyzed by ADAM derivatization. Quantification was performed according to previous studies14, 34, 35 and the manufacturer's instructions as follows. Oil (200 mg) and undecanoic acid (internal standard, 0.3 mg) were dissolved in 10 mL of acetone. ADAM reagent (1 mg/mL in acetone, 100 µL) was added to 50 µL of this acetone solution, and the mixture was allowed to react for 16 h at room temperature in the dark. After the reaction, the solution was diluted 10-fold with acetone. The reaction mixture (5 µL) was analyzed by HPLC-FLD using an LC-20 series HPLC system equipped with a fluorescence detector (FLD-20A, Shimadzu, Kyoto, Japan). Separation was carried out on a Lichrosorb RP-8 column (4.0 mm I.D., 250 mm, 5.0 um, Merck, Darmstadt, Germany) at 40 °C. The flow rate of the mobile phase (A, water; B, acetonitrile) was set to 1.0 mL/min. The gradient was as follows: 60% of mobile phase B for 15 min, 60–90% of mobile phase B between 15 and 30 min. The excitation and emission wavelengths were set at 365 nm and 412 nm, respectively. A calibration curve was prepared using the area ratio between oleic acid and the internal standard35. The calibration curve was used to quantitate the concentration of each free fatty acid (palmitic acid, stearic acid, oleic acid, linoleic acid, and linolenic acid).

Carboxylic acids produced during the heating of canola oil were identified with UPLC-Tof/MS using an ACQUITY UPLC H-class system equipped with a Zevo G2-S qTOF/MS (Waters, Milford, MA, U.S.A.). Heated canola oil was derivatized with the ADAM reagent as described above. To search for candidate compounds containing the anthryl group, the reaction mixture (1 μL) was analyzed using the UPLC-Tof/MSE mode (Condition 1 in Supplementary Table S2). The MS spectrum and product ion spectrum were obtained simultaneously without the selection of the precursor ion (i.e., data-independent MS/MS analysis)17,18,19. Product ion scan analysis with the selection of precursor ions was performed using Condition 2 described in Supplementary Table S2. Next, to identify the chemical structures of the candidate compounds, the heated canola oil, without ADAM derivatization, was analyzed by UPLC-Tof/MS. Heated canola oil was diluted 1000-fold with acetone, and 1 μL of the diluted sample was analyzed. The MS spectrum (Condition 3 in Supplementary Table S2) and the product ion spectrum with the selection of a precursor ion (Condition 4 in Supplementary Table S2) were obtained.

UPLC separations were performed using a CORTECS C18 column (2.1 mm I.D., 100 mm, 1.6 μm, Waters, Milford, MA, U.S.A.) at 55 °C. The flow rate of the mobile phase (A, methanol/water (1:1, v/v) containing 0.1% formic acid and 10 mM ammonium acetate; B, 2-propanol containing 0.1% formic acid and 10 mM ammonium acetate) was set to 0.2 mL/min. The gradient was as follows: 40% to 100% of mobile phase B between 0 and 15 min, 100% of mobile phase B between 15 and 20 min. MS parameters were optimized using the MassLynx v4.1 software (Waters, Milford, MA, USA). Leucine-enkephalin was used as the M.W. standard in the LockSpray mode. These systems provide a resolution of > 30,000 (full width at half maximum). The mass extraction window was set to ± 5 mDa. Elemental compositions were predicted based on accurate masses using the MassLynx v4.1 software.

GC-MS (Agilent 7890A gas chromatograph coupled with an Agilent 5975C MS system, Agilent, Little Falls, DE, USA) was used to determine the total amount of azelaoyl-triacylglycerols. Azelaoyl-triacylglycerols were methyl-esterified according to the official method of the AOCS (Ce 2-66)36 and quantified in the form of dimethyl azelate. The hexane layer containing fatty acid methyl esters was diluted 10-fold with hexane and analyzed by GC-MS. Methyl heptadecanoate was used as an internal standard. GC separation was performed using a DB-WAX GC column (0.25 mm I.D., 60 m, 0.25 μm film thickness, GL Science, Tokyo, Japan). The GC oven was programmed as follows: the initial oven temperature was 40 °C for 5 min, increased to 190 °C at 3 °C/min and held for 5 min, and then increased to 240 °C at 10 °C/min and held for 30 min. The helium flow rate was kept constant at 1.2 mL/min. The electron ionization mode and the scan monitor mode were used to analyze dimethyl dicarboxylates. The peaks were identified with reference to previous studies25 with some modifications. Extracted ion chromatograms at m/z 152 and 143 were used to analyze dimethyl azelate and methyl heptadecanoate, respectively. A calibration curve was constructed based on peak area ratios (dimethyl azelate/internal standard) and applied to calculate the concentration of dimethyl azelate.

A stainless steel pan was filled with fresh canola oil (600 g) and heated to 180 °C. Frozen French fries (100 g) were deep-fried at 180 °C for 7 min starting at 10:00 am. The fries were removed, and after an interval of 8 min, the next frozen fries were fried at 180 °C for 7 min. This process was repeated until six groups of French fries were fried. The heating of the oil was stopped at 11:30 am. The same oil was used to fry French fries in the same manner on the next day and the day after.

The datasets used and/or analyzed during the current study available from the corresponding author on reasonable request.

Wu, C. M. & Chen, S. Y. Volatile compounds in oils after deep frying or stir frying and subsequent storage. J. Am. Oil Chem. Soc. 69, 858–865 (1992).

Article CAS Google Scholar

Zhang, Q., Qin, W., Lin, D., Shen, Q. & Seleh, A. S. M. The changes in the volatile aldehydes formed during the deep-fat frying process. J. Food Sci. Techonol. 52, 7683–7696 (2015).

Article CAS Google Scholar

Xu, L. et al. Monitoring oxidative stability and changes in key volatile compounds in edible oils during ambient storage through HS-SPME/GC–MS. Int. J. Food Prop. 20, S2926–S2938 (2018).

Article Google Scholar

Choe, E. & Min, D. B. Chemistry of deep-fat frying oils. J. Food Sci. 72, R77–R86 (2007).

Article CAS Google Scholar

Chung, J., Lee, J. & Choe, E. Oxidative stability of soybean and sesame oil mixture during frying of flour dough. J. Food Sci. 69, 574–578 (2004).

Article Google Scholar

International Organization for Standardization. ISO 660: 2020 Animal and Vegetable fats and oils - Determination of acid value and acidity (2020).

Dobargarnes, M. C. & Márquez-Ruiz, G. Regulation of used frying fats and validity of quick test for discarding the fats. Grasas Aceites 49, 331–335 (1998).

Article Google Scholar

Ogata, F., Tanaka, Y. & Kawasaki, N. Effect of tocopherol treatment on deterioration of edible oil quality (acid value, carbonyl value, free fatty acid and radical activity). J. Oleo Sci. 63, 187–191 (2014).

Article CAS Google Scholar

Fujisaki, M., Mohri, S., Endo, Y. & Fujimoto, K. The effect of oxygen concentration on oxidative deterioration in heated high-oleic safflower oil. J. Am. Oil Chem. Soc. 77, 231–234 (2001).

Article Google Scholar

Zhang, W. et al. A unique quantitative method of acid value of edible oils and studying the impact of heating on edible oils by UV–Vis spectrometry. Food Chem. 185, 326–332 (2015).

Article CAS Google Scholar

Tsuzuki, W., Matsuoka, A. & Ushida, K. Formation of trans fatty acids in edible oils during the frying and heating process. Food Chem. 123, 976–982 (2010).

Article CAS Google Scholar

Mahboubifar, M., Yousefinejad, S., Alizadeh, M. & Hemmateenejad, B. Prediction of the acid value, peroxide value and the percentage of some fatty acids in edible oils during long heating time by chemometrics analysis of FTIR-ATR spectra. J. Iran. Chem. Soc. 13, 2291–2299 (2016).

Article CAS Google Scholar

Tynek, M., Hazuka, Z., Pawlowicz, R. & Dudek, M. Changes in the frying medium during deep-frying of food rich in proteins and carbohydrates. J. Food Lipids 8, 251–261 (2001).

Article CAS Google Scholar

Nishimura, K., Suzuki, T., Katsura, E. & Itabashi, Y. Reversed-phase HPLC/MS analysis of fatty acid 9-anthrylmethyl ester derivatives (in Japanese). Bunseki Kagaku 53, 533–539 (2004).

Article Google Scholar

Nishimura, K. et al. Analysis of conjugated linoleic acids as 9-anthrylmethyl esters by reversed-phase high-performance liquid chromatography with fluorescence detection. J. Choromatogr. Sci. 43, 494–499 (2005).

Article CAS Google Scholar

Uchida, H. et al. A convenient HPLC method for detection of okadaic acid analogs as 9-anthrylmethyl esters with automated sample cleanup by column switching. J. AOAC Int. 97, 391–397 (2019).

Article Google Scholar

Bateman, R. H. et al. A novel precursor ion discovery method on a hybrid quadrupole orthogonal acceleration time-of-Flight (Q-TOF) mass spectrometer for studying protein phosphorylation. J. Am. Soc. Mass Spectrom. 13, 792–803 (2002).

Article CAS Google Scholar

Silva, J. C. et al. Quantitative proteomic analysis by accurate mass retention time pairs. Anal. Chem. 77, 2187–2200 (2005).

Article CAS Google Scholar

Geromanos, S. J. et al. The detection, correlation, and comparison of peptide precursor and product ions from data independent LC-MS with data dependant LC-MS/MS. Proteomics 9, 1683–1695 (2009).

Article CAS Google Scholar

Kato, S. et al. Determination of triacylglycerol oxidation mechanisms in canola oil using liquid chromatography–tandem mass spectrometry. NPJ. Sci. Food 2, 1–11 (2018).

Frankel, N. E. Chemistry of free radical and singlet oxidation of lipids. Prog. Lipid Res. 23, 197–221 (1985).

Article Google Scholar

Yoshida, Y., Umeno, A. & Shichiri, M. Lipid peroxidation biomarkers for evaluating oxidative stress and assessing antioxidant capacity in vivo. J. Clin. Biochem. Nutr. 52, 9–16 (2013).

Article CAS Google Scholar

Onyango, A. N., Nakajima, S., Kaneko, T., Matsuo, M. & Baba, N. The rapid oxidative degradation of a phosphatidylcholine bearing an oxidatively modified acyl chain with a 2,4-dienal terminal. Chem. Phys. Lipids 131, 81–92 (2004).

Article CAS Google Scholar

Xu, L. et al. Evaluation of glycerol core aldehydes formation in edible oils under restaurant deep frying. Food Res. Int. 137, 109696 (2020).

Article CAS Google Scholar

Berdeaux, O., Velasco, J., Márquez-Ruiz, G. & Dobarganes, C. Evolution of short-chain glycerol-bound compounds during thermoxidation of FAME and monoacid TAG. J. Am. Oil Chem. Soc. 79, 279–285 (2002).

Article CAS Google Scholar

Gertz, C. Fundamentals of the frying process. Eur. J. Lipid Sci. Technol. 116, 669–674 (2014).

Article CAS Google Scholar

Dana, D., Blumenthal, M. M. & Saguy, I. S. The protective role of water injection on oil quality in deep fat frying conditions. Eur. Food Res. Technol. 217, 104–109 (2003).

Article CAS Google Scholar

Magdalena, R. et al. Influence of composition on degradation during repeated deep-fat frying of binary and ternary blends of palm, sunflower and soybean oils with health-optimised saturated-to-unsaturated fatty acid ratios. Int. J. Food Sci. Technol. 53, 1021–1029 (2018).

Article Google Scholar

Xu, L. et al. Inhibitory effect of antioxidants on key off-odors in French fries and oils and prolong the optimum frying stage. LWT 162, 113417 (2022).

Article CAS Google Scholar

Li, P. et al. Comparison between synthetic and rosemary-based antioxidants for the deep frying of French fries in refined soybean oils evaluated by chemical and non-destructive rapid methods. Food Chem. 335, 127638 (2021).

Article CAS Google Scholar

Li, J., Cai, W., Sun, D. & Liu, Y. A quick method for determining total polar compounds of frying oils using electric conductivity. Food Anal. Methods 9, 1444–1450 (2016).

Article Google Scholar

American Oil Chemists’ Society. Official Methods and Recommended Practices of the AOCS-AOCS official method Cd 3d-63 acid value method (2017).

American Oil Chemists’ Society. Official Methods and Recommended Practices of the AOCS-AOCS official method Cc 13e-92 color method (2017).

Shimomura, Y., Sugiyama, S., Takamura, T., Kondo, T. & Ozawa, T. Quantitative determination of the fatty acid composition of human serum lipids by high-performance liquid chromatography. J. Chromatogr. 383, 9–17 (1986).

Article CAS Google Scholar

Roemen, H. M. & Van Der Vusse, G. J. Assessment of fatty acids in cardiac tissue as 9-anthryldiazomethane esters by high-performance liquid chromatography. J. Chromatogr. B 570, 243–251 (1991).

Article CAS Google Scholar

American Oil Chemists’ Society. Official Methods and Recommended Practices of the AOCS-AOCS official method Ce 2–66 preparation of methyl esters of fatty acids (2017).

Download references

The authors would like to thank research assistant Ms. Shizuka Shiozaki for her efforts and technical support.

Food Design Center, J-OIL MILLS, INC., Yokohama, Kanagawa, 230-0053, Japan

Masayoshi Sakaino, Takashi Sano & Jun Imagi

Laboratory of Food Function Analysis, Graduate School of Agricultural Science, Tohoku University, Sendai, Miyagi, 980-8572, Japan

Masayoshi Sakaino, Shunji Kato, Naoki Shimizu, Junya Ito, Halida Rahmania & Kiyotaka Nakagawa

J-Oil Mills Innovation Laboratory, Graduate School of Agricultural Science, Tohoku University, Sendai, Miyagi, 980-8572, Japan

Shunji Kato, Jun Imagi & Kiyotaka Nakagawa

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

Conceptualization-M.S., T.S., S.K., K.N. Methodology-M.S. Validation-M.S., S.K., K.N. Formal analysis-M.S. Investigation-M.S. Resources-M.S., T.S., J.I.(Jun Imagi) Data curation-M.S. Writing manuscript-M.S., S.K., N.S., J.I., H.R., J.I., K.N. All authors reviewed the manuscript.

Correspondence to Kiyotaka Nakagawa.

J-OIL MILLS, INC. provided support in the form of salaries for author Masayoshi Sakaino, Takashi Sano, and Jun Imagi, but did not have any additional role in the study design, data collection and analysis, decision to publish, or preparation of the manuscript. Other authors (Shunji Kato, Naoki Shimizu, Junya Ito, Halida Rahmania, and Kiyotaka Nakagawa) declare no conflict of interest.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Sakaino, M., Sano, T., Kato, S. et al. Carboxylic acids derived from triacylglycerols that contribute to the increase in acid value during the thermal oxidation of oils. Sci Rep 12, 12460 (2022). https://doi.org/10.1038/s41598-022-15627-3

Download citation

Received: 07 April 2022

Accepted: 27 June 2022

Published: 21 July 2022

DOI: https://doi.org/10.1038/s41598-022-15627-3

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.